APPLICATION RECOMMENDATIONS
Contact us for specific application recomendations.

BEDDING PLANTS, PERENNIALS, CUT FLOWERS, PLUGS, WOODY ORNAMENTALS, NURSERY CROPS, TREES, FOLIAGE PLANTS & CONTAINER PLANTS

  • Application Recommendations SRN blends SRN blends need no mixing or agitation and will not settle out of solution.  When using a variable proportioner, SRN blends can be siphoned directly out of its original container.  SRN blend fertilizers are ideal for any type of fertigation system, drip irrigation or spray equipment.
  • Foliar FeedingWhen using overhead irrigation, SRN blends give you dual efficiency since the nutrients will be absorbed by both the leaves and roots.  For tender plants and green house foliar spray applications, use one-half the rate (PPM) you would normally use for drip irrigation feeding.  Foliar feeding should not be done when plants are in bloom.
  • How to extend feedings – Depending on crop species, temperature and soil composition, you can extend the timing between fertilization due to the controlled release nitrogen.  In order to assure plants are receiving adequate nutrient levels, an electrical conductivity reading (EC) should be taken immediately after fertilizer is applied and then at 7 day intervals.  By tracking the EC reading you can establish a nutrient release curve for your specific growing conditions and crops.
  • Hand watering – Mix 100 ml SRN blend per 4 litres of water.  Saturate soil with mix.
  • Drench – Use the Drench Rates chart in order to calculate application by specific number of pots.  Good for spray trucks and when irrigating over a large area.  Ideal alternative to top dressing with granulars.


DRENCH RATE FOR CONTAINER GROWN PLANTS
Pot Diameter cm Minimum Drench Volume
mls/pot mls/pot pots/400 litre
10 cm 60 6666
12.5 cm 120 3333
15 cm 180 2222
4 litre 270 1480
8 litre 600 666
12 litre 1050 380

DRENCH RATES
  LOW
Sensitive Plants
MEDIUM
Nursery Stock & Foliage
HIGH
Nursery Stock
Nitrogen Release Time 4 weeks 6 weeks 8 weeks
Nitro 35 per 400 litre tank mix 2.20 litres 3.30 litres 4.40 litres
Vision 20-20 per 400 litre tank mix 4.10 litres 6.15 litres 8.20 litres
Mission per 400 litre tank mix 4.3 litres 6.45 litres 8.60 litres
Balance-15 per 400 litre tank mix 5.40 litres 8.10 litres 10.80 litres
Nitro 11 Hi-K per 400 litre tank mix 7.40 litres 11.10 litres 14.80 litres

 

PARTS PER MILLION (PPM) RATE CHARTS
TO CHOOSE THE DESIRED NITROGEN, POTASSIUM RATIO

VISION 20-20      20:0:20
mls per litre of concentrate
PPM Nitrogen & Potassium 25 50 75 100 150 200 300 400
Injection rates 1:300 37.5 75 112.5 150 225 300 450 600
1:200 25 50 75 100 150 200 300 400
1:100 12.5 25 37.5 50 75 100 150 200
1:50 6.25 12.5 18.75 25 37.5 50 75 100
1:15 HOZON 1.9 3.75 5.5 7.5 11 15 22 30


BALANCE –15       15:4:8
mls per litre of concentrate
PPM Nitrogen 25 50 75 100 150 200 300 400
Injection rates 1:300 51 102 153 204 306 408 612 816
1:200 34 68 102 136 204 272 408 544
1:100 17 34 51 68 102 136 204 272
1:50 8.5 17 26 34 51 68 102 136
1:15 HOZON 2.5 5 7.5 10 15 20 30 40

MISSION      19:4:16
mls per litre of concentrate
PPM Nitrogen 25 50 75 100 150 200 300 400
Injection rates 1:300 40 80 120 160 240 320 480 640
1:200 26 52 78 104 156 208 312 416
1:100 13 26 39 52 78 104 156 208
1:50 6.5 13 20 26 39 52 78 104
1:15 HOZON 2 4 6 8 12 16 24 32

NITRO 35         35:0:0
mls per litre of concentrate
PPM Nitrogen 25 50 75 100 150 200 300 400
Injection rates 1:300

21

42 64 85 127 170 255 340
1:200 14 27 41 55 82 110 165 220
1:100 7 13 21 27 40 52 78 104
1:50 3.5 6.75 10.5 13.5 20 26 39 52
1:15 HOZON 1 2 3 4 6 8 12 16

NITRO 11 Hi-K       11:0:15
mls per litre of concentrate
PPM Nitrogen 25 50 75 100 150 200 300 400
Injection rates 1:300 67 135 200 270 400 540 810 1080
1:200 45 90 135 180 270 360 540 720
1:100 22 44 66 90 135 180 270 360
1:50 11 22 33 44 66 90 135 180
1:15 HOZON 3.3 7 10 14 20 28 42 56

 


home |company profile | products | nutrient programs| MSDS | search | contact us

© 2016. SprayGro. All Rights Reserved. Please read our Disclaimer.